Recently Updated Pages
The Board and Other Writings
Science Fair - Google Docs.pdf Above is a link to a document with all of the material I used on...
The Digital Apostle
“Go! Go! Go! Yesss!” Carlo said, pumping his fist in the air. I sighed, “How are you so good at...
Rubric
The 2024 and 2023 projects use the same rubric, from the CSCOE Big Bang Fair, and the only flyer ...
New Page
Pictures
Result
The rover met three out of four standards for this challenge: temperature and humidity readings, ...
FINAL VERSION Materials and Procedure
Materials lcd (Liquid Crystal Display) screen M7 photoresistor module DHT11 Temper...
Abstract
Abstract In this design challenge, there were no obstacles until my original rover controller, a...
Challenge
There was some conflict with this, because with all of my sensors and breadboard extension module...
Rubric
The CSCOE Big Bang science fair had this printed for all of the competitors, as a rubric and a gu...
Wiring
Here is the wiring diagram that I used on the board for the presentation. Then, here is a bett...
The Code
There were a lot of draft codes, like a lot, which is why these are the finalized code. Who wants...
Introduction
My dad gave me an Altoids tin once he had finished it, and I wanted to make a nice bright LED cir...
The Code
Since designing it was pretty simple, writing the code was also fairly straightforward. I use...
Introduction
On a Sunday morning, the 23rd of November, solemnity of Christ the King, I was messing around wit...
Materials and Procedures
There were many variations of each, I will start with oldest to newest. The Original Materials L...
Engineering Design Process
Engineering Design Process Define the problem Do background research Specify requirements B...
Brainstorming
My original idea was to make a rover that would be sent to unknown areas and take temperature and...